Description of Quality Standards for Components of Solar LED Street Light from xiuxiu's blog


The components of the Solar led street light(CLASSICLEDLIGHT) mainly include batteries, light poles, control inverters, and street light power supplies. What are the functions of these parts? Below we introduce Hengyuan Lighting, about the components of an LED street light. Related introduction.

Solar panels provide energy for solar LED streetlights. Their function is to convert the solar light energy into electrical energy and store it in a battery. It is the most valuable component of solar LED streetlights. The working principle of this part is the solar photon and the radiant heat of the P-N junction hole and electron movement in the solar cell. This is also known as the principle of the photovoltaic effect. The battery is the energy storage of the solar LED street light, and the collected power is supplied to the street light to realize the illumination. Since the input energy of the solar photovoltaic power generation system is extremely unstable, it is generally required to configure the battery system to work. Let us give you an example of these two parts. Let's take a look at the quality standards of each part.

Description of quality standards for various components of solar LED street light:

1. LED luminaire: The thickness of the outer casing determines the quality of the product. The thickness of the aluminum substrate or aluminum plate should reach 1.5mm, the heat dissipation should reach the standard, and the light bead adopts the chips of international brands such as wafer or Puri.

2. Battery: Is it a special battery for energy storage? At present, some unscrupulous companies use the most energy-storing battery to start the power supply, which greatly reduces the life of the street light.

3. Panels: In addition to the use of polycrystalline panels in foggy areas such as Sichuan and Chongqing, monocrystalline panels are recommended in other regions because of the higher conversion rate of single crystals than polycrystals.

4. Light pole: Whether hot-dip galvanizing, hot-dip galvanizing still has galvanized layer in the incision part, cold-galvanized has no galvanized layer in the incision. The upper port diameter is generally 60mm, the bracket diameter is generally 76mm. The light pole has 11 --12 taper ratio.

If you are ready to upgrade to a more efficient lighting system, for more information, please click Led street lights Manufacturers.

Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment