The Crate Mould Is Analyzed When It Is Manufactured from xiu's blog


The defects of most crate products are caused during the plasticizing and injection stages of the Crate Mould(FURNITUREMOULD), but sometimes they are also related to unreasonable design. The influencing factors include the type of injection port, the number of mould cavities, location and size, the design of the cold/hot runner system, and the structure of the product itself. Therefore, in order to avoid product defects caused by the design of the crate mould, we need to analyze the crate mould when making it.

After the test results of the crate mould, the operator usually needs to re-evaluate the specific conditions of the crate mould to avoid unnecessary cost and time in the process of modification. In most cases, in order to make up for the deficiencies in the die design of crates, the operator may make incorrect settings without knowledge, because the parameter setting range required to produce qualified products is very small, and any deviation in parameter setting may lead to the quality of the final products far beyond the allowable error range.

The purpose of the mould test of the crate mould is to find out the optimized technological parameters and the design of the crate mould. Not just to get a good sample. This is very important. Even if factors such as materials, machine settings or environments have changed, a stable and uninterrupted mass production environment can still be ensured.

If you are interested in our products, you can click Dustbin Mould to learn more information.

Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment