Loading...
en

Can Not Ignore The Small Problem of Paddy Separator from lianggong's blog

advertisement

Paddy Separator(LIANGGONG) equipment will inevitably have some minor problems in the long-term operation, these small faults can be easily adjusted to solve the problem. However, if you think this is a glitch, don't pay attention to ignoring the big failures that will develop, the damage caused by our paddy separator equipment, the impression of production, causing big problems or minor problems, as long as there is a problem that should be attached to a high degree of attention.

The paddy separator equipment needs to be inspected before processing, and the vigilance is abnormal during work.

1. If the paddy separator equipment shakes, check the fixing screws and tighten the grinding head and frame connecting bolts. Check the stability of the screws with a corner.

2. Normally produced powder or less powder is likely to be blocked by the screen.

3. The paddy separator equipment works normally, but the output is reduced. The roller gap should be adjusted and the spring pressed to ensure a clearance between the ends of the same roller. Grinding teeth may wear out for too long and are severely worn and should be redrawn.

Click Paddy Husker to learn about more information.


Share:
Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment

Post

By lianggong
Added Dec 26 '18

Tags

Rate

Your rate:
Total: (0 rates)

Archives

advertisement