Loading...
en

Chair Mould Layout Check Several Items from xiu's blog

advertisement

The Chair Mould(FURNITUREMOULD) layout inspection project is an important part. In the face of the chair mould layout design, it is necessary to carefully analyze and study the layout design. After the completion of the layout design, it will be repeatedly reviewed to prevent cracks. Once found, improve the design and correct the errors in different parts of the layout to check and content. Different.

In general, the chair mould layout inspection items have the following types: 1 Check whether it is necessary to meet the required assembly position in the mould strength and open mode, and should minimize the empty station and check whether the material utilization rate is the best utilization plan. Precision parts can ensure the accuracy of the parts due to the feeding accuracy of the stripping material. The positioning accuracy and precision of the mould will affect the dimensional deviation of the parts. The size of the high-precision joints should be in the same position of the forming or take other measures to ensure the accuracy of the parts. Such as the flatness and verticality required for the product.

In addition to the chair mould structure, it should be noted that the necessary process should be added to ensure that the progressive die adaptive structure of more than four die structures is used for the splicing type of single piece, segment or sub-module, such as the determination of the chair mould structure should check the layout Whether it is suitable for the requirements of 5 bending depth stretching forming process, such as moulding, due to the flow of material, can cause material flow Oude hole and shape deformation material flow Oude hole and shape should be placed in the deformation process, or increase the dressing process from above Look at the project, the reliability of the carrier strength, the parts have formed parts have any influence on the feed, the burr direction is bending deformation, the curve line of the curved part material is vertical or 45°, e tc. These small also need to be checked in place"

Click Crate Mould to learn about more information.


Share:
Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment
advertisement