How to Make A Crate Mould from xiu's blog


How to make a Crate Mould(FURNITUREMOULD)? First, the steel material should be selected for the mould base and the mould core cavity portion. For example, to produce a pair of four-out crate mould, pre-hardened steel with a hardness higher than 33 must be used as the mould base, and then the appropriate mould standard parts should be selected. Second, the hardness of each piece of steel must be controlled, not too hard.

Then, the friction and guiding parts of the crate mould must be finished and no manual work can be used. If you need to mould a durable tote, you must use a low melt index HDPE material, such as a plastic with an index of 4 or 6. Second, make sure the cooling system is optimal. To create a durable and durable hydraulic drive with the machine for automatic ejection, the ejection action during mould opening can be smoother.

Most of the world's crate mould manufacturers use accelerators to increase the injection speed of the melt. The design of the crate mould is equally important. The ejection mode of the crate mould is preferably designed to be mechanically ejected, so that the ejection operation can be completed when the mould is opened.

Click Dustbin Mould to learn about more information.

Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment