Loading...
en

User blogs

advertisement
Tag search results for: "rice huller"
lianggong

Generally speaking, when using the Rice Grader(LIANGGONG) equipment, it is necessary to follow the specifications, and the operator must undergo qualified training. Rice grader equipment is no exception, so what are the correct operating guidelines to follow when operating rice grader equipment?

The rice grader equipment must be operated by a special person, and must be relatively stable. The technical indicators and the economic responsibility system should be linked to clarify the equipment operation, maintenance, inspection, inspection, handover responsibility, clear work content and equipment responsibility, and equipment Lubrication, condition monitoring of equipment and specific record requirements of sanitary areas, etc., quantitative assessment of equipment operation and management personnel's equipment status and indicators, such as equipment integrity rate, failure rate and so on.

The company reserves the secondary and senior management, production and technical professionals to supply high-quality products and excellent service based on the scientific management and latest technology. It sticks to the tenet of “quality foremost, faith as essential”to insistently respond customers with high-quality products and perfect after service.The sales networks of the company are covered all over China as well as South American, South East Asia, Africa etc.The company cordially welcomes all of you to visit us for the win-win future.

Click Rice Huller to learn about more information.

lianggong

Do not use iron rods or screwdrivers to dial the row of cake wheels during the operation of Rice Grader(LIANGGONG) equipment to prevent accidents. During the operation before driving, it is strictly forbidden to screw the screw shaft to the dead point, so that the slag tip and the cake ring come into contact with each other, causing equipment accidents. When the equipment is running, tighten the locknut to prevent the shaft. The equipment must be pure before use and should not be placed in stone or metal blocks. During the operation of the equipment, it is forbidden to extend the rice into the hopper by hand or metal rod, and only use wooden sticks to prevent the screw shaft from cutting off the fingers. The motor of the device must be grounded.

Carefully check and maintain the rice grader motor regularly. The motor is dismantled and maintained, the equipment motor bearing is cleaned or replaced, the insulation is monitored, and the cooling system is perfected to ensure that the motor is running in good condition. It is necessary to ensure the quality of maintenance. When the equipment motor is repaired, it is necessary to ensure that various parameters meet the technical requirements of the original machine, strictly control the quality of the replaced parts and the enameled wire, correctly operate the various processes, prevent various hidden dangers caused by human beings, and improve the repairs. The quality of the motor runs to ensure that the control system is operational.

In the case that the rice grader equipment does not stop, it can still clear the material at any time, which is good for preventing clogging, ensuring uniform mixing, and no powder residue at one time, which can ensure the uniformity of various components. The feed size is not limited, it can be directly fed into the machine without coarse crushing, and can adapt to various materials with different water content.

Click Rice Huller to learn about more information.

lianggong

In order to make Rice Huller(LIANGGONG) equipment produce excellent results and produce high-quality rice, it is necessary for major manufacturers to regularly maintain the equipment when it is used daily, because although the rice huller equipment is only one machine, If it is not well maintained, it will also fail. In particular, the motor of the rice huller equipment is better maintained, because the quality, output and output rate of rice are inseparable from the motor of the rice huller equipment.

Carefully do the regular inspection and maintenance of the rice huller equipment motor. The motor is dismantled and maintained, the equipment motor bearing is cleaned or replaced, the insulation is monitored, and the cooling system is perfected to ensure that the motor is running in good condition. To ensure the quality of maintenance, when repairing the motor of rice huller equipment, it is necessary to ensure that various parameters meet the technical requirements of the original machine, strictly control the quality of the replaced parts and the enameled wire, correctly operate the various processes, prevent various hidden dangers caused by human beings, and improve repairs. The quality of the motor after operation ensures that the control system can operate in good condition.

Click  Rice Grader to learn about more information.

lianggong

The complete set of Rice Grader(LIANGGONG) machine has the characteristics of reasonable structure, convenient maintenance, low energy consumption and high efficiency. It has been favored by manufacturers in the grain processing industry and has been used by more and more people. As we all know, regular maintenance of rice grader complete sets of equipment is an important measure to help equipment to improve work efficiency, then today we will discuss the details of the overhaul work of rice grader complete sets of equipment.

We should do a good job in overhauling the complete set of rice grader machine equipment to improve work efficiency:

1. Regular inspection and repair work on the complete set of rice grader machine can understand the use of each component at any time. For parts with serious wear and damage, it should be replaced in time to avoid potential safety hazards and affect the complete equipment of rice grader machine. normal operation.

2. During the inspection, the flatness and integrity of the sun body should be ensured to ensure smooth operation during operation, such as abnormal sound. Regularly lubricate the parts to be lubricated to ensure lubricity and avoid parts due to lack of lubrication. The wear between.

3. The cleaning work should be carried out in time after the end of the daily production work, so as to avoid the screen hole being blocked. When the screen hole is blocked, we can use the correct method to clean and use the long board brush to remove the blockage. It is strictly forbidden to use iron or hard object to knock, so as not to cause Damage to the components of the rice grader complete equipment.

4, in the usual work should pay attention to the lubrication and maintenance of the various components, to ensure that the lubrication between the components is reduced during operation due to lack of lubrication to aggravate the wear and affect the normal operation, the rice grader complete sets of equipment should be frequently given to the bearing shell during idle periods Add some lubricant to increase the speed of operation.

5. The complete set of rice grader machine equipment should be guaranteed to be watched by the special person during the operation. If the abnormal situation occurs, the operator should stop the machine in time, notify the professional maintenance personnel to carry out the repair, and should make a maintenance record.

Click Rice Huller to learn about more information.

lianggong

In the process of using Rice Grader(LIANGGONG), it is difficult to avoid problems with the machine. For some surface faults, it can be easily solved, but for some internal faults, it may be necessary to disassemble the rice grader equipment. Blind disassembly may cause more serious damage to rice grader equipment, so here are some things to be aware of when disassembling machinery and equipment.

Pay attention to the following points when cleaning rice grader equipment:

1. Use the appropriate tools when disassembling the rice grader equipment without slamming it to avoid damage or deformation of the parts.

2. Surface dirt and oil should be removed before disassembly, and should be kept clean during disassembly.

3. After the parts are disassembled, they should be stored according to the nature of the materials and the precision of the parts.

4. Disassemble according to the needs of rice grader equipment, disassemble as little as possible, and do not disassemble without disassembly.

5. When the rice grader equipment is disassembled, it must be prepared for assembly. In order to improve the assembly efficiency and ensure the correctness of the assembly, it is necessary to pay attention to check and mark the disassembly.

6. Disassemble the rice grader equipment in a reasonable order, usually from the attachment to the main part, from the outside to the inside, first disassemble the whole machine into an assembly, and then disassemble the assembly into parts and disassemble the parts into parts.

7. Before the washing and processing of rice grader machinery, the gas source and power supply should be turned off; if the rear part of the rice grader machine is equipped with electrical control accessories, the machine itself should not be washed directly with water, otherwise there will be a crisis of electric shock and damage to electrical operation.

In addition, it should be noted that when the rice grader equipment is running, it often leaves some impurities in the dead corner, and these impurities become very difficult to clean. Therefore, these impurities will cause the wear of the rice grader equipment to be intensified, and the quality of the processed flour of the rice grader equipment will be degraded. For some dead angles of processing equipment, difficult to clean parts, timely and reasonable cleaning.

Click Rice Huller to learn about more information.

lianggong

In the past, the work of shelling and removing impurities from rice, this series of work needs to be done manually. As the demand in society increases, the daily output rate of enterprises must also rise. The disadvantage of manual production is low efficiency, and the working time is certain. The use of manual production is not only inefficient, but also high in production cost. However, if you are using Rice Huller(LIANGGONG) equipment, you don't need to worry about these problems.

1. When using the motor as the power, first make sure that the power cord is firmly connected, and also tightly wrapped and pay attention to the installation of the ground wire.

2. Must pay attention to continuous and evenly into the rice rod, and the amount of input should be appropriate. If the rice is intermittently put into operation, it will inevitably affect the production efficiency of the rice thresher. If the input of the rice is too large and the machine is overloaded, the machine will be stuck, which will cause the motor to burn and damage the equipment.

3. The user should pay attention to the water content of the threshed rice bar can not exceed 20%. If the water content is too high, the normal threshing effect will not be achieved, and even the phenomenon of threshing will not occur.

4. Before the rice huller equipment starts to operate, be sure to place it on a flat surface to ensure that the machine can operate smoothly and firmly, so as to avoid the machine from vibrating during operation.

Click Rice Grader to learn about more information.

lianggong

It is very important for us to take care of food, clothing and accommodation. We want to choose an advanced Rice Huller(LIANGGONG) equipment, which is clear about the performance and working principle of the equipment. The purchase of rice huller equipment should consider the best performance, minimum power, good finished product quality, convenient operation, high output and low power consumption. It can clean, peel, remove embryos, remove roots, remove black umbilical cord, and break the rice once. Processes such as picking, grading, polishing, selecting, and packing are completed at one time. The finished product has a smooth appearance, uniform particles and bright color.

The principle of rice huller equipment is:

(1) By adopting the principle of planetary rotation, the input and output are on the same axis, and it has the uniqueness of being directly connected with the motor. Therefore, the structure is compact, novel and novel, small in size and light in weight.

(2) The operation is reliable and stable, the noise is low, the fault is small, the service life is long, and the toothed parts are made of ductile iron and bearing steel. Good performance and high wear resistance.

(3) Bearings, gear boxes, away from the valve body, to avoid the influence of high temperature dust, the front and rear end caps have good sealing performance, prevent dust leakage, and prolong the service life of the moving parts and lubrication system.

(4) The wind-closer of the rice huller machine has strong overload capability and small impact-resistant moment of inertia, which is suitable for frequent starting and reverse rotation.

Click Rice Grader to learn about more information.

lianggong

The white Rice Grader(LIANGGONG) rotary screen adopts a box-type structure, has an eccentric mechanism, and the eccentric shaft shaft head is externally arranged to facilitate pressing the screen body. This design not only ensures strength requirements, but also facilitates the replacement of the screen. The design of the body with the grooved frame structure improves the assembly processability. The sieve body is changed from a wooden frame to a trough-shaped iron frame, which solves the problem that the sieve body is difficult to replace and the material leakage phenomenon, and prolongs the service life of the sieve body.

White rice grader rotary screen operation method

1. The white rice grader rotary screen should be placed horizontally; confirm that the power supply and the nameplate requirements are consistent, and ensure that the grounding; the vibration part can not be in contact with other objects; whether the bolts are locked.

2. Determine the sieve frame to be selected according to the materials to be inspected and the corresponding standards.

3. Lay the screen frame from small to large according to the aperture, and stack it on the base of the screen frame from bottom to top.

4. Put the material to be inspected into the uppermost sieve frame, cover the standard inspection sieve upper cover, adjust the height of the adjustment rod according to the total height of the sieve frame, and then press and clamp the standard sieve frame with the pressure plate and the lock nut. The force on both sides should be consistent).

5. According to the nature of the material and the amount of material to be fed, set the running time on the timer, then turn on the power switch, and the standard inspection screen will start working.

6. After the standard test sieve is stopped, unscrew the lock nut, remove the pressure plate, and carefully remove the standard sieve frame.

7. Turn off the power.

Click Rice Huller to learn about more information.

lianggong

The basic properties of the rubber roller Rice Huller(LIANGGONG) (how much the amount of grain rolling) depends on the physical and mechanical properties of the external rubber compound, the performance is as follows:

(1) Hardness: Hardness refers to the ability of rubber to resist deformation when compressed by an external force. Generally, the Shore A type hardness tester is used to measure the value, and the hardness of the rubber roller is generally strict. Too high will increase the rubber loss of the rubber roller and the excessively low broken rice will reduce the shelling rate. Shibuya rubber rollers should be equipped with different hardness values ??according to different regions, seasons and other conditions of use (such as rice seeds, temperature, etc.). Generally, the hardness of the rubber roller is 85 degrees, 90 degrees, and 95 degrees. The tolerance range is ±3 degrees. It should also be pointed out that the above hardness is not a fixed value. The value is at the standard temperature (23 °C ± 2o) depending on the production season. ) and measured under the standard sample, and the hardness value of the rubber roller in actual working is different from the rating of the rubber roller, and generally decreases.

(2) Anti-aging performance: The so-called aging refers to the deterioration of the quality of rubber due to the physical and chemical effects of oxygen, odor, heat, light ray and other fatigue in the long-term storage and use of rubber. The physical and mechanical properties are degraded and scrapped. After aging, the performance of the rubber roller is hardened, brittle, cracked and mildewed. The elastic strength of the rubber material is greatly reduced, which seriously affects the use effect, even though the rubber roller is in production. Many anti-aging measures have been taken, but it is still very important to do a good job of anti-aging work.

(3) Balance: Balance refers to the ability of the rubber roller to maintain a fixed axis of rotation when rotating. Strictly speaking, it is a kind of dynamic balance, but since the rubber roller is not a precision mechanical part, and the dynamic balance is not easy to measure, it is actually Adopting the concept of static balance, that is, the symmetry of the quality of each part relative to the working axis, commonly known as “heavier weight”, the balance of the rubber roller is good for the shelling rate, brown rice rate, gel consumption and the normal operation of the grain machine. Has a major impact.

Click Rice Grader to learn about more information.

lianggong

THDS series Rice Grader(LIANGGONG) can be used for classifying materials of various grains and coarse rice etc. The rice thickness grader machine carries out the classifications in accordance with the thickness of the materials which can effectively separate rice with shorter width and broken and unripe rice.

When the materials are passing through the rice grading sieve machine, smaller grains or beans will be discharged through the bar mesh of the sieve, so as to get the broken and immature grains separated efficiently. The thickness Grading Machine is compact in structure, easy in maintenance and quick in replacement of sieve barrels; and it is equipped with a sieve mesh cleaning device to keep the sieve mesh clean all the time. The rice thickness grader is widely implicated in the processing of high-precision rice.

The company reserves the secondary and senior management, production and technical professionals to supply high-quality products and excellent service based on the scientific management and latest technology. It sticks to the tenet of “quality foremost, faith as essential”to insistently respond customers with high-quality products and perfect after service.The sales networks of the company are covered all over China as well as South American, South East Asia, Africa etc.The company cordially welcomes all of you to visit us for the win-win future.

Click Rice Huller to learn about more information.

Pages: 1 2 3 Next
advertisement