Loading...
en

User blogs

advertisement
Tag search results for: "solar led street light"
xiuxiu

With the increasing scarcity of the earth's resources and the increasing cost of investment in basic energy, various potential safety and pollution hazards are everywhere. Solar energy, as an "inexhaustible" safe and environment-friendly new energy source, has received more and more attention. At the same time, with the development and progress of solar photovoltaic technology, Solar led street light(CLASSICLEDLIGHT) products to have the dual advantages of environmental protection and energy saving. The application of solar LED street light has gradually formed a scale, and its development in the field of street light lighting has become increasingly perfect.

Solar LED street light are lit all year round and rainy weather is guaranteed. LED light saves energy and has high luminous efficiency. Good color rendering, pure white light, all visible light. In addition, the most important point is that it can be driven by direct current, which is especially important for solar energy because the electricity generated by solar energy is also direct current, which can save the cost and energy loss of inverter.

Solar LED street light uses sunlight as an energy source, charging during the day and using at night, does not need complicated and expensive pipeline laying, can arbitrarily adjust the layout of lights, is safe, energy-saving and pollution-free, does not need manual operation, is stable and reliable, and saves electricity and maintenance-free.

The system consists of a solar cell module part (including a bracket), an LED light cap, a control box (with a controller and a storage battery) and a light post. Basic composition

The solar LED street light is mainly composed of a solar cell module part (including a bracket), an LED light cap, a control box (with a controller and a storage battery) and a light pole. The solar panel has a luminous efficiency of 127Wp/m2, which is relatively high and is very beneficial to the wind-resistant design of the system. The LED light headlight source uses a single high-power LED (30W-100W) as the light source, uses a unique multi-chip integrated single module light source design, and selects imported high-brightness chips.

The control box body is made of stainless steel, which is beautiful and durable. Maintenance-free lead-acid battery and charge-discharge controller are placed in the control box. The valve-regulated sealed lead-acid battery is used in this system, which is also called "maintenance-free battery" due to its little maintenance and is beneficial to reduce the maintenance cost of the system. The charge-discharge controller is designed with full functions (including light control, time control, overcharge protection, over-discharge protection and reverse connection protection) and cost control, thus achieving high-cost performance.

If you are ready to upgrade to a more efficient lighting system, for more information, please click Led street lights Manufacturers.

xiuxiu

Led street lights Manufacturers(CLASSICLEDLIGHT) Tell You about Cleaning and Maintenance of Garden Lights:

1. Clean the interior of the lights and lanterns, clean the lights and lanterns, wipe the lights and lanterns first, after wiping alone can remove the lights and lanterns. If you are going to clean the light, remember not to rotate the light clockwise to avoid peeling off the light cap too tightly.

2. Solar courtyard lighting is usually dusty. Cleaning wet wipes can be directly used for wiping. The action must be kept in the same direction, and do not wipe back and forth. The intensity should be moderate, especially for pendant lights and wall lights.

Maintenance of Courtyard Lights:

1. If the lampshade is found to be inclined during cleaning or use, correction shall be made to keep it beautiful.

2. Replace the aged light according to the light source parameters provided by the logo. If red, black or shadow is found on both ends of the light, replace the light in a time when the light does not beat, so as to prevent the occurrence of unsafe phenomena such as ballast burning.

If you are ready to upgrade to a more efficient lighting system, for more information, please click Solar led street light.

xiuxiu

In the past, most lighting fixtures used high pressure sodium lamps, however, these lamps produced yellow light and did not provide good visibility. The use of LED lights provides whiter, more natural light, providing better overall illumination, even though they look brighter and darker than older HPS lamps. This provides significant cost savings because the amount of power required to illuminate these luminaires with a lower power loss factor is less.

The US Department of Transportation recently conducted a study in July 2014 to maximize the use of the source spectrum to maximize pedestrian safety and evaluate the differences between older HPS lamps and new LED sources. The study shows how pedestrians in cities and suburbs perceive the illumination that needs to walk along the road at night. They found that people using LED light sources feel safer and safer, even if the brightness of the old HPS lamp is reduced.

Since road lighting can save 51 billion kWh of electricity per year, switching to LEDs can save more than 30% of energy and is used only for road lighting. If switching to a Solar led street light(CLASSIC) is the next step, and because of the lower power usage of the LEDs and the lower power loss due to the LEDs being turned off, they will be the next logical step to reduce power usage. United States. Pulling the light out of the grid, or installing only solar LED street light in a new installation, will be the best way to reduce power and provide a clean alternative to standard lights.

Click Led street lights Manufacturers to learn about more information.

xiuxiu

In the past, most lighting fixtures used high pressure sodium lamps, however, these lamps produced yellow light and did not provide good visibility. The use of LED lights provides whiter, more natural light, providing better overall illumination, even though they look brighter and darker than older HPS lamps. This provides significant cost savings because the amount of power required to illuminate these luminaires with a lower power loss factor is less.

The US Department of Transportation recently conducted a study in July 2014 to maximize the use of the source spectrum to maximize pedestrian safety and evaluate the differences between older HPS lamps and new LED sources. The study shows how pedestrians in cities and suburbs perceive the illumination that needs to walk along the road at night. They found that people using LED light sources feel safer and safer, even if the brightness of the old HPS lamp is reduced.

Since road lighting can save 51 billion kWh of electricity per year, switching to LEDs can save more than 30% of energy and is used only for road lighting. If switching to a Solar led street light(CLASSIC) is the next step, and because of the lower power usage of the LEDs and the lower power loss due to the LEDs being turned off, they will be the next logical step to reduce power usage. United States. Pulling the light out of the grid, or installing only solar LED street light in a new installation, will be the best way to reduce power and provide a clean alternative to standard lights.

Click Led street lights Manufacturers to learn about more information.

xiuxiu

Led street lights Manufacturers(CLASSIC) use semiconductor light as a light source because LED is a solid cold light source with environmental pollution, low power consumption, high luminous efficiency and long life. Street lights are an important part of urban lighting. Traditional street lights often use high-pressure sodium lights. High-pressure sodium lights have low efficiency and cause huge energy waste. Therefore, new high-efficiency development, energy saving, long life and high color rendering index. Street lights are of great significance to urban lighting energy conservation and environmental protection.

At present, LED lighting technology is becoming more and more mature, and the effect of high-power LED light source has reached 100LM / W or more, which makes energy-saving renovation of urban street lighting possible. LED lights, especially high-power LED street lights, are the rapid impact of the traditional street light market.

Click Solar led street light to learn about more information.

xiuxiu

Better Solar Lighting Results Buying a Solar led street light(CLASSIC) system for any application is a daunting task. There are many choices and decisions that can make you easily lost in the specification. Regardless of the application, you can take three simple steps to ensure that your system achieves at least good results.

Step 1

Use LED luminaires that provide high lumen output per watt. This information can be found in any spec sheet, if it is not correct, please request it. High wattage LED fixtures don't mean it provides bright illumination; it all depends on the lumens provided by the LEDs. Knowing the available lumens/watts of LEDs can help you determine which fixtures provide the light you need. For more information on the differences between Watts and Lumens, check out Wattage and Lumens: Learn about the differences in better lighting.

Step 2

Make sure your solar system provides enough power during the day and provides plenty of backup storage. The solar LED street light system should always be designed for the worst case, because if you use more than your input, the system will start to malfunction. Adjusting the system size during the summer and even the average annual sunshine does not ensure that your system is running for a short period of time and at night. Make sure your system always provides about 20% of your power generation, and you can enjoy at least 5 nights of autonomy in inclement weather. This ensures that your system is up and running, even in bad weather.

Step 3

Be sure to follow the installation instructions carefully and install the sun-free south facing site. Reading the installation manual before starting the installation will allow you to decide if you have everything you need and remind you of any special needs of the system. There can also be tags on the system that point to what you need. Finally, make sure the system faces directly south and there are no shadows on the solar panels throughout the day, which will ensure that the solar lighting system will stand the test of time. If there are trees nearby, make sure they are trimmed very well.

Following these three simple steps will ensure that your solar lighting system delivers the best results.

If you are ready to upgrade to a more efficient lighting system, for more information, please click Led street lights Manufacturers.

xiuxiu

The smart city is also gradually advancing. For the more mature industry lights, there are still some difficulties in the construction of the mass brand, but the dawn has already appeared. Therefore, Led street lights Manufacturers(CLASSIC) should have a deep understanding of the development of the industry, look at the national market, and develop national roads.

Do an online, offline art, and this time more close to the market, understand the industry's development trend on the street, to take the lead in others. Knowing ourselves and knowing each other can be a victorious battle. Therefore, a good plan in this regard is also necessary, which is conducive to the development of enterprise projects. LED street lights manufacturers to deepen brand positioning, to be based on the long-term, we must first continue to deepen LED street lights manufacturers.

Led street lights can evolve into different styles in urban lighting according to different needs, and are very advantageous lighting street lights. Led street light is a new type of light source street light, which can be used in different places, even some places with high brightness requirements, soft light and wide illumination range are suitable for use with led street lights. Therefore, led street lights are more and more used, and are also widely used lighting street lights.

Illuminated led street light brand not only uses technical means to improve the efficiency of lighting, reduce lighting energy consumption, but also can suppress various impulses of "lighting" in concept. To suppress this impulse, we need a deeper understanding of the light culture and an improvement of aesthetic consciousness.

The led street light brand can not only achieve the urban night scene lighting effect, but also meet the low carbon ecology. The outdoor led street light should be combined in the application and selection of the lighting source, lighting and electrical appliances. Led street lights are recognized by the world as the third lighting revolution in the history of human lighting with the advantages of energy saving, environmental protection, rich colors, safety, long life and miniaturized semiconductors. With the improvement of LED technology, its application fields continue to expand and extend.

If you are ready to upgrade to a more efficient lighting system, for more information, please click Solar led street light.

xiuxiu

In the past, we may only know high-pressure sodium lights, but as Led street lights Manufacturers(CLASSIC) are developing faster and faster, high-pressure sodium lights have gradually faded out of our sight. Many people may wonder why LED street lights manufacturers will develop so quickly. In fact, this is a big reason. Let's take a look at it:

In fact, LED street lights manufacturers are developing rapidly, and one of the most important reasons is due to cost. In the past, the high-pressure sodium light used by us had a very high power consumption, almost double the power consumption of led street lights, and the service life was only half of that of led street lights. The main reason for popularizing street lights now is to reduce the cost of the city.

In addition to cost reasons, there are other reasons for LED street lights to replace high-pressure sodium lights. According to statistics, the 60W led street light can reach the illumination of 250W high-pressure sodium light, and the use power of led street light itself is relatively small, which is a very good thing for us.

In addition, high-pressure sodium lights are actually less environmentally friendly and contain harmful rays. They are an unsafe product. The LED street lights used today are safe and low-voltage products, do not contain harmful rays, and can greatly reduce safety hazards during installation and use.

As the times develop more and more rapidly, it will gradually eliminate some products that are not suitable for society, and high-pressure sodium lights are one of them. The led street light is energy-saving and environmentally friendly, has a long service life, is safe and reliable, and is bound to replace the high-pressure sodium light. I believe that in the days to come, there will be other products to replace the street lights of led street lights, but the benefits of led street lights are still a lot, what do you say?

If you are ready to upgrade to a more efficient lighting system, for more information, please click Solar led street light.

xiuxiu

How Solar led street light(CLASSIC) work whether you are talking about small garden lights found in any large store or commercially produced solar lighting system, they all offer the same functionality. The difference between them is in design. The following is a basic overview of how solar led street light work.

Any light has four main components; solar panels, batteries, control electronics and fixtures. During the day, solar panels generate electrical energy that charges the battery through photons generated by the sun's rays and collects and stimulates electrons in the silicon cell. These electrons are knocked out by the wiring of the solar panel and collected and sent to the battery for storage. This happens when the sun begins to rise until the sun sets. Full power production does not actually take place until noon; however, panels can generate electricity in almost any sunny environment.

The battery then stores the electrical energy generated during the day. The control electronics determine when it is dark by noticing the reduced power production of the solar panel. This will trigger the system to stop powering and turn on the luminaire. The luminaire then removes energy from the battery to produce light. The luminaire then operates the schedule profile for its set-up, whether it is dusk to dawn or under certain lights, when the battery is exhausted. When the battery is too low or the control electronics notices that the solar panel is generating power again, the indicator light will go out.

If you are ready to upgrade to a more efficient lighting system, for more information, please click Led street lights Manufacturers.

 

xiuxiu

With the support of the national policy to support the trend of changing the street light, the Led street lights Manufacturers(CLASSIC) ushered in the market's ice age, the street light shipments fell sharply, and with the new companies coming in, the price war waved. The LED street lights manufacturers are facing the decline in sales and the decline in profits. The LED street lights manufacturers who are running and bankrupt are also appearing.

Survival in adversity and development is a very urgent issue for every LED street lights manufacturer.

After a period of observation, on the one hand, the local demand is declining, but there are also some local areas of heavy volume development, such as the Yangtze River Delta, Sichuan, Guizhou and other places, the improvement of the rural image in Hebei Province, the success of the Winter Olympics. Will become a hot spot in the local market.

The demand for LED street light in foreign countries has increased rapidly. In South America, North America and Asia, Japan, South Korea, Malaysia, Singapore and other countries, the LED street light market is developing rapidly. According to the overall market research, the market demand for outdoor lighting products such as street lights, tunnel lights and underground parking lots in the United States is about 200 million ticks this year. There are about tens of millions of street lights in Japan and South Korea. Improving product quality and entering the foreign market is also a good way out for LED street lights manufacturers.

Develop strategic cooperation and advance into the "EMC model"

Vigorously improve product quality, develop unique products with enterprise characteristics, suitable for market needs, and occupy the market with fine products.

Unique and adopting differentiated market strategies, such as targeting the current hot market of solar street light, improving product quality systems, and establishing sound corporate standards, especially in the construction of new rural areas, solar street lights will surely achieve significant development.

If you are ready to upgrade to a more efficient lighting system, for more information, please click Solar led street light.

Pages: 1 2 3 4 5 ... Next »
advertisement